X-Lite Setup Guide for Windows

1. Setting up X-Lite

This step-by-step guide explains how to setup X-Lite.

1. Download the X-Lite software from the Xten download site and install it.

2. Run X-lite, right click on the phone and select SIP Account Settings.

   

3. Click the Add button on the right side of the popup window.

   

4. Enter your name in the Display Name box.

5. Enter your SIP ID in the Username box (if you're not sure what this is, check the Broadband Phone Control Panel or the email you received after activating Broadband Phone).

6. Enter your SIP password in the Password box (If you ever change your SIP password, you'll need to update it here).

7. Enter your SIP ID in the Authorization Username box (it's the same as the username entered in step 5).

8. Enter sip.plus.net in the Domain/Realm box.

9. Ensure Register with domain and receive incoming calls is ticked.

10. Select Proxy and enter: sip.plus.net.

11. Click the Apply button and then click OK.

    
12. X-Lite will now automatically connect.

2. Setting up X-Lite with a firewall

Follow these steps if you are behind a NAT enabled firewall:

1. Right click on the X-Lite phone.

2. Click SIP Account Settings.

3. Double-click on the account you use to connect with.

4. Click the Topology tab in the new popup window.

5. Tick Use specified server and enter stun.xten.net in its box.

6. Tick Manually specify range and enter 5060 - 5061.

7. Select Automatic from the dropdown menu for Use XTunnels.

8. Click the Apply button and then click OK.

Connecting via specified STUN server

These are the settings you should use if you are using a specific STUN server, as described above.

Connecting automatically (Discover server)

If you want to use the 'Discover server' feature, use these settings instead.

[Top]

This page last updated 28th October 2009