We use cookies to make sure you have the best experience on our website. By continuing without changing your settings, you agree to receive all cookies. Read our cookie policy for more information.

We've updated our cookie policy since you last agreed to it. By continuing without changing your settings, you agree to receive all cookies.

Netgear WNR1000 - wireless settings guide

Help Archive Broadband Netgear WNR1000 - wireless settings guide

This article is not regularly maintained

This archived article may contain information that's not up-to-date. It's here so you can still refer to this older info, but it's not regularly maintained and our Customer Support Advisors won't be able to help with queries about it.

If you've got a question about this article, why not ask the Plusnet Community? Or, for the latest Help & Support articles, head over to plus.net/help

Step 1 Open your web browser (This might be Internet Explorer, Safari or Firefox).

Ignore any websites (or error messages) that appear and go to www.routerlogin.net.		 Enter the router IP into your web browser
Step 2 You'll be asked to log in. The username is admin and (unless you've changed it) the password is password. Your router's home page indicates that you're logged in.
Step 3 You'll see a firmware update check (which you can skip if you like) before being taken to the Basic Settings screen. Your router's home page indicates that you're logged in.

To access your routers wireless settings, log in as described above and select Wireless Settings (under Setup) from the blue menu on the left of your screen.

The available options are explained below:

Setting What does it do?
Enable SSID Broadcast By default, your Netgear router displays it's Name (SSID) to any device that scans for wireless networks. To stop this from happening, untick this box.

Computers and other devices will still be able to connect to your network but you'll need to type the SSID in, rather than choosing it from a list.
Enable Wireless Isolation When enabled, devices connected over wireless can only access the Internet. They won't be able to access any other devices or log in to your router.
Name (SSID) The broadcast name of your wireless network, you'll see it when scanning for networks to connect to.
Region The region controls the available frequencies that your router can broadcast wireless signals over.

Please note: Changing the region can result in your router broadcasting on frequencies that are illegal to use in Europe.
Channel Choose the channel (frequency) that your wireless network transmits on. By default this will be set to Auto.

• Auto - your router will choose the best channel each time you switch it on
• 01-13 - choose a single channel to broadcast on

If you're having problems, using a single channel can improve the stability of your wireless connection.

You'll need to experiment to find the channel that's best for you. We recommend trying channels 1, 6 or 12 first.
Security Options Choose the method of encryption for your wireless network.

• None
• WEP
• WPA-PSK
• WPA2-PSK
• WPA-PSK [TKIP] + WPA2-PSK [AES]

WPA2 is the newest and most secure version of WPA, but not all systems support it.

WPA-PSK [TKIP] + WPA2-PSK [AES] is the standard option and will allow connections through either level of WPA.

Only change to WPA2 if all your computers or devices support it.

None means anyone can access your network. WEP is an outdated method of encryption which is easily cracked. We do not recommend choosing either of these options.

Leave this set to WPA-PSK [TKIP] + WPA2-PSK [AES] unless you have a specific reason to change.
Security Options Passphrase This is the password you need to log on to your Wireless network.

To allow someone to connect to your wireless network without giving them your wireless password, you can set up a secondary 'guest' network with it's own separate connection settings.

To do this, log in as described above and select Guest Network Settings (under Setup) from the blue menu on the left of your screen.

The available options are explained below:

Setting What does it do?
Enable Guest Network If this check box is checked, then your guest network is enabled.
Enable SSID Broadcast By default, your Netgear router will display the Guest Network Name (SSID)to any computer that scans for available networks. To stop this from happening and hide the SSID, untick this box.

Computers and other devices will still be able to connect to your network but you'll need to type the SSIDin, rather than choosing from a list of available networks.
Allow guest to access My Local Network If Checked, devices connected to the guest network can access the internet and all devices connected to both the guest and primary networks.

If Unchecked, devices connected to the guest network can only access the Internet and other devices connected to the guest network.
Enable Wireless Isolation When enabled, devices connected to your guest network can only access the Internet. They won't be able to access any other devices or log into your router.
Guest Wireless Network Name (SSID) The broadcast name of your guest wireless network, you'll see it when scanning for networks to connect to.
Security Options Choose the method of encryption for your wireless network.

• None
• WEP
• WPA-PSK
• WPA2-PSK
• WPA-PSK [TKIP] + WPA2-PSK [AES]

WPA2is the newest and most secure version of WPA, but not all systems support it.

WPA-PSK [TKIP] + WPA2-PSK [AES]is the standard option and will allow connections through either level of WPA.

Only change to WPA2if all your computers or devices support it.

Nonemeans anyone can access your network. WEPis an outdated method of encryption which is easily cracked. We do not recommend choosing either of these options.

Leave this set to WPA-PSK [TKIP] + WPA2-PSK [AES] unless you have a specific reason to change it.
Security Options Passphrase This is the password you need to log on to your Wireless network.

Please note: Changing your routers advanced settings can cause problems with your connection. Please be careful

To access your router's advanced settings, log in as described above and select Wireless Settings (under Advanced) from the blue menu on the left of your screen.

The available options are explained below:

Setting What does it do?
Enable Wireless Router Radio Switch your wireless on or off.
Fragmentation Length

CTS/RTS Threshold

Pre-amble mode 		These options are reserved for wireless testing and advanced configuration only. We do not recommend changing these settings.
Router's PIN This is the PIN number used to connect devices via WPS.
Disable Router's PIN Checking this box prevents any device from connecting using WPS.
Keep Existing Wireless Settings If this option is unticked, each new WPS connection will change the router's wireless settings to an automatically generated random SSID and security key.
Wireless Card Access List Switch on and configure MAC address filtering.

This is an archived article and may contain information that's not up-to-date - more info

Still need help?

  • Chat to us online

    Online chat is currently unavailable, please choose another option.

    Start chat

    Your browser's blocking online chat

    To chat to us, please switch off any ad blocking software.

  • Give us a call

    Our support phone lines are open 7 days a week.

    Call us