1. Make sure you're using equipment supplied by Plusnet
To view Internet channels you should only use the set top box and router that we've supplied.
Other routers may work, however we can't guarantee or provide support for them. Additional set top boxes won't work as YouView TV from Plusnet doesn't currently support a multi-room setup.
2. Are you having picture problems with any other channels?
- Try a Freeview channel - e.g. (1 - BBC1).
- If you are having picture problems go to Freeview steps.
3. Check your broadband connection
Internet channels are provided through your broadband connection, so this needs to be working correctly to view these channels.
To watch these channels with good picture and sound, you need a stable broadband connection with a minimum download speed of 15Mb.
If you're having problems with your broadband connection, see our broadband troubleshooting guide.
Our about broadband speeds page will help you make sure you're getting the best possible speed on your line.
4. Reboot your equipment
Switch off your Plusnet router, BT Openreach modem and set top box either via the wall socket or the power switch on the back of each unit (where applicable).
After 30 seconds:
Switch the BT Openreach modem back on and wait until the DSL light turns green.
Switch on your Plusnet router and wait until the Internet light turns green.
Finally switch your set top box on, and check if you're still having problems.
5. Check your cables
Make sure all cables are connected securely. The connection between your set top box and Plusnet router is important at this point. However, you should also check your aerial and HDMI cables.
The best way to do this is to unplug and reconnect each cable in turn. If a spare socket is available (e.g. a spare Ethernet socket on your router, or a spare HDMI socket on your TV) it's worth trying the connection with these too.
6. If you're using Powerline adapters
If your router and set top box are close enough, remove your Powerline adapters and try connecting your set top box directly to your Plusnet router with the 10m Ethernet cable.
If you can't do this, please see our Powerline Adapters troubleshooting guide for additional help.